RadioFrame Networks Inc DH2 User Manual
Method of Procedure
Pre-Installation
Pre-Installation
48
RFN_3.1 Beta
3.8 URU
3.8.1 Mounting
The URU can be placed on any flat surface or mounted using the provided
mounting screws. The URU must be located within 12 feet of an approved power
source.
mounting screws. The URU must be located within 12 feet of an approved power
source.
3.8.2 Clearances
•
Dimensions: 5.5" wide x 1.25" high x 5.5" deep (approx.)
3.8.2.1 Back
•
2”
3.8.2.2 Front
•
3”
3.8.2.3 Sides
•
1”
3.8.2.4 Above
•
Above: 0”
•
Below: 0.125”
3.8.3 Weight
•
1.5 lbs
3.8.4 Power
•
100-240 Volts AC converts to negative 48VDC (power cord provided)*
* The URU uses –48 VDC. The input voltage connector on the URU requires
–48 VDC. The provided power cord includes an external isolated power
supply that converts 100-240 VAC to –48 VDC. The input supply requires 48
volts DC, 2A.
* The URU uses –48 VDC. The input voltage connector on the URU requires
–48 VDC. The provided power cord includes an external isolated power
supply that converts 100-240 VAC to –48 VDC. The input supply requires 48
volts DC, 2A.