RadioFrame Networks Inc DH2 User Manual
RadioFrame System
Installation
RFN_3.1 Beta
75
Figure 25
Connect the RFU to the ACU, then ensure that the RFU is receiving
power and connectivity from the ACU.
power and connectivity from the ACU.
4.4.3
Insert the RadioBlades and RAPs into the RFU
The iDEN RadioBlades and 802.11 RAPs are shipped several to a box in
individually wrapped antistatic packaging. Each box of RadioBlades/RAPs
includes a disposable antistatic wrist strap to be used when inserting the
RadioBlades/RAPs into the RFU. Refer to the site documentation for the exact
slot location of each RadioBlade/RAP within the RFU.
individually wrapped antistatic packaging. Each box of RadioBlades/RAPs
includes a disposable antistatic wrist strap to be used when inserting the
RadioBlades/RAPs into the RFU. Refer to the site documentation for the exact
slot location of each RadioBlade/RAP within the RFU.
1 Unwrap 30 cm (12”) of the disposable wrist strap and wrap the adhesive side
around your wrist.
2 Unroll the rest of the band and remove the liner from the copper tape.
3 Attach the copper tape to the metal card cage inside the RFU.
4 Un-package the iDEN RadioBlades to be inserted in the RFU.
5 Insert the iDEN RadioBlades, one at a time, into the specified slots (1 through
7) in the RFU until the connector on each RadioBlade seats firmly into the
back of the RFU (see the following illustration).
back of the RFU (see the following illustration).
6 Unscrew the antenna from each iDEN RadioBlade, one at a time, and place
the antennas on an antistatic surface (see the second following illustration).