RadioFrame Networks Inc MCSERIESHP10 User Manual
MC-Series High-Power System
Management—Datafill, Configuration and Optimization
998--01 Rev X1
RadioFrame Networks, Inc.
CONFIDENTIAL AND PROPRIETARY 59
6.2 System Manager, Configuration and Optimization
6.2.1 Navigating System Manager
6.2.1.1
Logging into System Manager
1 Connect a laptop computer to port 8 of the BIC CRIC using an Ethernet (Cat-5)
cable.
2 Start System Manager by typing the IP address of the MC-Series system into
Internet Explorer (default 192.168.200.5).
3 The System Manager Home page appears and displays five tabs to select from to
set up and monitor the RadioFrame MC-Series system.
Figure 35 System Manager Home Page
• Home—displays a welcome banner and a link for setting up users and changing the
MC-Series system password.
• System Configuration—depicts the status of the BIC, AIC, RBS and RadioBlade
transceivers.
• Alarms—displays alarm information.
• Performance Monitoring—displays real-time performance information.
• Diagnostics—provides tools for testing.
• Support—displays support information, including online help.
4 To log in, select any tab.
5 For User Name, type the MC-Series system user name.
6 For Password, type the MC-Series system password.
7 To save the password, check ‘Save this password in your password list’
• Performance Monitoring—displays real-time performance information.
• Diagnostics—provides tools for testing.
• Support—displays support information, including online help.
4 To log in, select any tab.
5 For User Name, type the MC-Series system user name.
6 For Password, type the MC-Series system password.
7 To save the password, check ‘Save this password in your password list’
checkbox.