RadioFrame Networks Inc MCSERIESHP10 User Manual
MC-Series High-Power System
Management—Datafill, Configuration and Optimization
998--01 Rev X1
RadioFrame Networks, Inc.
CONFIDENTIAL AND PROPRIETARY 57
6 Management—Datafill, Configuration and Optimization
This section describes configuration techniques that affect the behavior of the MC-Series
High-Power system. Section 6.1 covers the datafill parameters as they differ from the
Motorola EBTS. Section 6.2 covers configuration options using System Manager, with
sections 6.2.1 and 6.2.2 introducing basic operations and 6.2.3 presenting optimization
procedures.
High-Power system. Section 6.1 covers the datafill parameters as they differ from the
Motorola EBTS. Section 6.2 covers configuration options using System Manager, with
sections 6.2.1 and 6.2.2 introducing basic operations and 6.2.3 presenting optimization
procedures.
6.1 Datafill
The MC-Series High-Power system is designed for compatibility with the Motorola EBRC
and QUAD Base Radios (BRs). However, due to architecture differences between the two
systems, not all datafill parameters apply equally to the MC-Series High-Power system.
and QUAD Base Radios (BRs). However, due to architecture differences between the two
systems, not all datafill parameters apply equally to the MC-Series High-Power system.
This section describes only those datafill parameters that need to be taken into
consideration when used with the MC-Series High-Power system. Any datafill parameter
not described here can be assumed to behave identically to the Motorola EBTS. This
section includes:
consideration when used with the MC-Series High-Power system. Any datafill parameter
not described here can be assumed to behave identically to the Motorola EBTS. This
section includes:
6.1.1 Parameters that RFN does not support
6.1.2 Parameters that have no effect on the MC-Series High-Power system
6.1.3 Parameters that RFN supports, but which need to be setup differently from the typical
6.1.2 Parameters that have no effect on the MC-Series High-Power system
6.1.3 Parameters that RFN supports, but which need to be setup differently from the typical
setup for a Motorola BR
6.1.1 Unsupported Datafill Parameters
The following datafill parameters are currently not supported.
6.1.1.1 steThresholdMode
The Slot Timing Error Threshold Mode parameter has three different purposes:
• Setting to zero allows the EBTS to automatically determine the STE threshold
based on history of inbound transmissions.
• Setting to maximum value of 250 essentially disables the use of STE filtering.
• A manual override exists by setting the parameter in the range of 1 to 249. The
• A manual override exists by setting the parameter in the range of 1 to 249. The
default value is set to 250.
This datafill parameter will be supported in the MC-Series High-Power system starting
with 15.0 releases of System Manager software.
with 15.0 releases of System Manager software.
6.1.1.2 brPwrReducModeAcg
The BR Power Reduction parameter is used to enable/disable the Power Reduction
feature on a per-BR basis. The default value is set to 'ON' and it is on-line changeable.
feature on a per-BR basis. The default value is set to 'ON' and it is on-line changeable.
This feature will be supported in the MC-Series High-Power system starting with 15.0
releases of System Manager software.
releases of System Manager software.
6.1.2 Parameters that Do Not Apply to the MC-Series High-Power System
The following parameters have no effect on the MC-Series High-Power system. There is
no functional equivalent in the MC-Series High-Power system, and as such the
parameters can be ignored.
no functional equivalent in the MC-Series High-Power system, and as such the
parameters can be ignored.