RadioFrame Networks Inc MCSERIESHP10 User Manual
MC-Series High-Power System
Management—Datafill, Configuration and Optimization
998--01 Rev X1
RadioFrame Networks, Inc.
CONFIDENTIAL AND PROPRIETARY 71
2 Select a BR icon to display the Base Radio Performance Statistics page.
3 Verify that the mean INI is within normal range (will vary depending on what is
3 Verify that the mean INI is within normal range (will vary depending on what is
connected between TOR and the antenna).
4 Verify that the % poor SQE does not exceed 2% on a substantial number of
packets (i.e., greater than 10,000 packets).
5 Repeat steps 2 through 4 for each BR in the system.
Figure 46 Base Radio Performance Statistics Page
6.2.3.2
iDEN Uplink Analysis
RadioFrame Networks’ iDEN Uplink Analysis Tool plots the Mean RSSI, Mean I+N and
SQE for the last 80 seconds for the BR channel which has been selected. Figure 47
shows the System Manager page, accessible from the Diagnostics tab. The analyzer
prints the following information:
SQE for the last 80 seconds for the BR channel which has been selected. Figure 47
shows the System Manager page, accessible from the Diagnostics tab. The analyzer
prints the following information:
• Mean RSSI (
-----
red): Average Received Signal Strength Indicator.
• Mean I+N (
-----
magenta): Average Interference Plus Noise.
• SQE (
-----
yellow): Signal Quality Estimate.