RadioFrame Networks Inc MCSERIESHP10 User Manual
MC-Series High-Power System
Management—Datafill, Configuration and Optimization
998--01 Rev X1
RadioFrame Networks, Inc.
CONFIDENTIAL AND PROPRIETARY 73
monitor voice quality. The person on the Mobile simply speaks into the mobile and can
hear his or her own voice.
hear his or her own voice.
To use the Voice Loopback Test feature:
1 Click Start Test on the Voice Loopback Diagnostic Test Page to start the voice
packet loopback. The first call, and only the first call, set up after Start Test is
selected will be looped back. If a call other than the tester’s happens to be set up
after Start Test is selected and before the tester has the opportunity to set up the
call, the other call will be looped back.
selected will be looped back. If a call other than the tester’s happens to be set up
after Start Test is selected and before the tester has the opportunity to set up the
call, the other call will be looped back.
Figure 48 Voice Loopback Diagnostic Test Page
2 Speak into the handset, and listen to evaluate voice quality.
3 Click Stop Test to terminate the test.
3 Click Stop Test to terminate the test.
The loopback will persist on the selected BR until the Stop Test button is selected.
The Test Status line will give a brief indication of the test state (Not Started; Waiting for
Call Setup; Started).
Call Setup; Started).
6.2.3.4
System Parameter Information Page
The System Parameter Information Page displays the type 1 iDEN System Parameter
Information that comes across the BCCH chain.
Information that comes across the BCCH chain.
Note: Only a subset of the BCCH information is currently displayed.