Remington Security Camera Inc. CAM02420 User Manual

  

When first power on the  Monitor, the system will placed the unit in Manual scanning mode, with a dwell 
time of 2 seconds. 

 

The Auto LED will lit to indicate that the unit is in Auto scanning mode. 
 
The 4 channel in the receiver can be scanning one by one in sequential order automatically. 
 
In Auto mode, press the Auto/Manual key or Ch select key will stop the Auto scan function and place the 
receiver in manaul mode. 
 
In Manual mode, press the CH. Select key to select the corresponding channel that you want. 
 
Press the Auto/Manual mode again will active the Auto scanning function. 

 

 

 (Programmable at 2 sec, 5 sec, 10 sec) 

 
 

 

Press and hold CH select button to select different dwell time, the Auto LED will indicate the dwell time 
setting when you release the button. 
 
ON LED means 2 second dwell time 
  
If you continue to hold the button, the LED will flashing at one sec rate which  means if you release the 
button now, then the dwell time is 5 secs. 
 
   
If you continue to hold the button, the LED will flashing at three sec rate which  means if you release the 
button now, then the dwell time is 10 secs. 

 

5.   Specification / Features  

 
 
Power Supply            

: 

      AC adapter                    13V    1000mA  

 

 

 

 

     

Current consumption         : 

      800mA typical   

 
Channel Frequency  

: 

   2411 – 2473  Mhz 
    
 

 

 

 

 

Channel Selection       

: 

PLL synthesizer,    4 Channel  

 
Modulation System    

: 

FM modulation 

 
 
Video output  level  

: 

1 Vpp @ 75 Ohm 

 
Audio output 

 

: 

1 Vpp  

 
Sound output  

 

: 

0.5 Watt 

 
Antenna type  

       

: 

Dipole