Shenzhen Breo Technology Co. Ltd IDREAM3 User Manual
User Manual
Main Unit and Remote Control
1 Main Unit, 1 Controller, 1 Power Charger, 3 Batteries, 1 User Manual,
1 Set of Earphones, 1 USB Cable
1 Set of Earphones, 1 USB Cable
Thank you for purchasing Breo iDream3.
Please read this manual carefully before using the product,
and keep it in a safe place for future reference.
Please read this manual carefully before using the product,
and keep it in a safe place for future reference.
For relief of minor aches and pains
iDream3 adopts air pressure, vibration, and hot compress massaging
technology to massage the head and ocular regions. It comes with a wireless
remote control and built-in MP3 player. You can now enjoy wonderful music
while massaging, further relaxing your head and eyes.
technology to massage the head and ocular regions. It comes with a wireless
remote control and built-in MP3 player. You can now enjoy wonderful music
while massaging, further relaxing your head and eyes.
3
Power on
Open the battery cover on the back of the remote control.
Place 3 AAA batteries in accordance with the positive and negative
poles.
Close the battery cover. (Picture1)
Place 3 AAA batteries in accordance with the positive and negative
poles.
Close the battery cover. (Picture1)
1.
2.
2.
3.
Music Downloading
Connect the main unit to computer using the supplied USB cable;
Push the power protection key on the main unit to Level “I”;
Copy MP3 music to the device.
Push the power protection key on the main unit to Level “I”;
Copy MP3 music to the device.
1.
2.
3.
3.
Wear
Use the back dial to adjust the distance between head to establish the
most comfortable fit, and wear main unit.
Use the top dial in setting the distance above head.
most comfortable fit, and wear main unit.
Use the top dial in setting the distance above head.
1.
2.
(picture 1)
to Level “I”
(picture 2)
11.
10.
2.
1.
3.
7.
4.
8.
6.
6.
5.
9.
Please make sure that one main unit is corresponding to one remote
controller. The operation of encoding joint with multiply remote controller to
the main unit is prohibited.
controller. The operation of encoding joint with multiply remote controller to
the main unit is prohibited.
EYE & HEAD MASSAGER
Introduction
Inside the package
Main Unit
Controller
Function Deployment
LCD Screen
ON/Off
Operating Buttons
Air discharge
DC power interface
Earphone Jack
ON/Off
Operating Buttons
Air discharge
DC power interface
Earphone Jack
Power Switch Protection key
Encoding Key
USB Port
Size Adjusting Knob
Tightness Adjusting Knob
Encoding Key
USB Port
Size Adjusting Knob
Tightness Adjusting Knob
1.
2.
3.
4.
5.
6.
2.
3.
4.
5.
6.
7.
8.
9.
8.
9.
10.
11.
11.
Pressure Reduction Valve
DC Power Port
LCD Screen:From top to bottom: Time /Air Pressure/Vibration/Hot Compress/Music
Operating Button:Clockwise: Up Button/Function Mode Next/Down Button
/Function Mode Previous
Center: OK Button
Power switch protection key: Push left or right to turn ON/OFF
MUST push power switch to Level “O” after each use
Operating Button:Clockwise: Up Button/Function Mode Next/Down Button
/Function Mode Previous
Center: OK Button
Power switch protection key: Push left or right to turn ON/OFF
MUST push power switch to Level “O” after each use
Important: Make sure that only one device is paired with the remote control. Multiple
pairing of remote control and main unit is strictly prohibited.
pairing of remote control and main unit is strictly prohibited.
Attention:
In case of problem with connection between the main unit and remote
control, you can perform joint encoding operation:
control, you can perform joint encoding operation:
Turn the remote control off, and push the power switch of the main
unit to level “O”;
Press and hold [8] encoding key of the main unit. While still holding
it, push the power switch of the main unit to level “I” to turn it on;
The blue LED indicator on the front of the main unit flashes.
unit to level “O”;
Press and hold [8] encoding key of the main unit. While still holding
it, push the power switch of the main unit to level “I” to turn it on;
The blue LED indicator on the front of the main unit flashes.
1.
2.
3.
and
lights up while the main unit’s blue LED indicator turns off-it means
the encoding is successful (This step should be completed within 6
the encoding is successful (This step should be completed within 6
Release [8] encoding key, and simultaneously press the
keys of the remote control for 2-3 seconds. The remote control LCD
seconds). If unsuccessful, repeat from the start.
Push the power switch of the main unit to level “O”, then back to
level “I”. Both the main unit and remote control should now be
working.
Push the power switch of the main unit to level “O”, then back to
level “I”. Both the main unit and remote control should now be
working.
Prior to use, check the integrity of the machine and accessories:
No damage on power charger
Battery power is sufficient
Battery power is sufficient
1.
2.
2.
Preparation
Attention:
Push the power switch on the main unit to Level “O”. Keep the massager
turned OFF while charging. Charging time is approximately 3-4 hours.
If the massager is turned on while recharging, all functions of the product
will run normally. The machine will automatically stop charging to
prevent damage to the device.
If the power of the battery is lower than 3.2 0.1V, the machine will
automatically turn off. If the LED indicator of the main unit flashes, it
means the lithium battery is low. Recharge the main unit.
turned OFF while charging. Charging time is approximately 3-4 hours.
If the massager is turned on while recharging, all functions of the product
will run normally. The machine will automatically stop charging to
prevent damage to the device.
If the power of the battery is lower than 3.2 0.1V, the machine will
automatically turn off. If the LED indicator of the main unit flashes, it
means the lithium battery is low. Recharge the main unit.
1.
2.
3.
+
Manually operate related buttons to select air pressure mode, vibration mode,
hot compress temperature, change music and/or massage duration.
hot compress temperature, change music and/or massage duration.
10.
11.
12.
13.
14.
15.
16.
17.
To clean, wipe with aseptic cotton and alcohol. Do not wash or
immerse in water.
This product is not a substitute for healthcare professionals' advice
and treatment. In case of doubt or if necessary, please consult your
healthcare professional.
Please use ONLY the DC4.5V power charger that comes with the
package, and handle it with care.
It is very IMPORTANT to turn the power of the main unit OFF after
each use and before storage to avoid damage to the machine.
immerse in water.
This product is not a substitute for healthcare professionals' advice
and treatment. In case of doubt or if necessary, please consult your
healthcare professional.
Please use ONLY the DC4.5V power charger that comes with the
package, and handle it with care.
It is very IMPORTANT to turn the power of the main unit OFF after
each use and before storage to avoid damage to the machine.
Problem
Possible Reason
Possible Solution
Power-On Failure
Weak air pressure
or vibration
or vibration
Lithium battery of the main unit
is low
is low
Lithium battery of the main
unit is low
unit is low
Recharge the main unit at once
Remote control batteries are
low/ out
low/ out
Change batteries
Remote control batteries are not
installed correctly
installed correctly
Check if positive/negative poles of
batteries are positioned right
Make sure the batteries are snug in
place
Recharge the main unit at once
Power Switch Protection key
is not turned on
is not turned on
Push this key to Level “I”
Ideal
Environment:
Temperature 5℃~40℃ Relative Humidity ≤80%
Main Unit:L282mm X W206mm X H254mm
Controller :L132mm X W44mm X H24mm
Net Weight:
DC/Power:
Atmospheric Pressure: 860hpa~1060hpa
1125g
Dimension:
DC: 4.5V
Power: 4.5W
When operational problems occur, please refer to the chart below.
Do not disassemble the machine or try to repair it by yourself.
Do not disassemble the machine or try to repair it by yourself.
Troubleshooting
Specifications
2.
3.
3.
Storage
If left unused, checking the product/turning the power on every 6 months is
recommended.
Do not store near the floor, wall or roof.
Maintain good ventilation and keep away from direct sunlight and corrosive
gases.
recommended.
Do not store near the floor, wall or roof.
Maintain good ventilation and keep away from direct sunlight and corrosive
gases.
Made in China
Manufactured by: Shenzhen Breo Technology, Co., Ltd.
Company Address: Jinshan Bldg., No. 5033, Shennan East Road, Shenzhen,
518008, China
1.
Precautions
1.
2.
3.
2.
3.
Please read the manual carefully and operate accordingly.
Children under 7 years old cannot use the massager.
This massager should not be used by:
a. People who suffer from brain disease or have undergone brain surgery
b. People who are suffering from glaucoma, retinoschisis or other serious
eye diseases
c. People who have physical or mental disorder
Children under 7 years old cannot use the massager.
This massager should not be used by:
a. People who suffer from brain disease or have undergone brain surgery
b. People who are suffering from glaucoma, retinoschisis or other serious
eye diseases
c. People who have physical or mental disorder
Attention:
When you feel the air pressure is too much and/or uncomfortable, press the
Pressure Reduction Valve on the main unit to release air.
When you feel the air pressure is too much and/or uncomfortable, press the
Pressure Reduction Valve on the main unit to release air.
If the massager will not be used for a long time, remove the batteries to
avoid battery leakage.
avoid battery leakage.
9.
Time
— Press Button to select “Time”
— Press Button to select massage duration
15 minutes/10 minutes/5 minutes
— Press Button to select “Time”
— Press Button to select massage duration
15 minutes/10 minutes/5 minutes
Press Button to choose
— Press Button to turn on/off a function
— Press Button to select air pressure mode, vibration mode, hot
compress temperature, change music and/or massage duration
— Press Button to select air pressure mode, vibration mode, hot
compress temperature, change music and/or massage duration
among functions
(Time, Air Pressure, Vibration, Heat, and Music)
Vibration
— Press Button to select “Vibration”,then Press Button
— Press Button to select from the 5 different modes of vibration
—Off/On: Press Button to turn off/on Vibration
— Press Button to select “Vibration”,then Press Button
— Press Button to select from the 5 different modes of vibration
—Off/On: Press Button to turn off/on Vibration
Heat compression
— Press Button to select “Heat Compression”
— Press Button to select low temperature or high temperature
— Off/On: Press Button to turn off/on Heat Compression
— Press Button to select “Heat Compression”
— Press Button to select low temperature or high temperature
— Off/On: Press Button to turn off/on Heat Compression
Air pressure
— Press Button to select “ Air Pressure”
— Press Button to select from the 5 different modes of air pressure
(Preset Default: Mode 5 – circulates among Modes 1 to 4)
— Off/On: Press Button to turn off/on Air Pressure
— Press Button to select “ Air Pressure”
— Press Button to select from the 5 different modes of air pressure
(Preset Default: Mode 5 – circulates among Modes 1 to 4)
— Off/On: Press Button to turn off/on Air Pressure
Music
— Press Button to select “Music”,then Press Button
— Press Button to go to the next one
(Preset Default – circulates among pre-recorded music)
— Press Button to go to the previous one
— Press and hold Button: Volume up
— Press and hold Button: Volume down
— Off/On: Press Button to turn off/on Music
— Press and hold Button to switch over between built-in music and MP3
music
— Press Button to select “Music”,then Press Button
— Press Button to go to the next one
(Preset Default – circulates among pre-recorded music)
— Press Button to go to the previous one
— Press and hold Button: Volume up
— Press and hold Button: Volume down
— Off/On: Press Button to turn off/on Music
— Press and hold Button to switch over between built-in music and MP3
music
Manual
Power Charger
Earphones
Batteries
USB Cable
Operation
Charging of Main Unit
Open the cover of the DC power port on the main unit.
Insert the plug of the power charger to the DC port.
During charging, the light of the power charger is red. The light turns green
when fully charged.
Insert the plug of the power charger to the DC port.
During charging, the light of the power charger is red. The light turns green
when fully charged.
1.
2.
3.
2.
3.
Operation
Automatic Mode (without the remote control)
1.
2.
Power ON – Push the ON/OFF switch on the main unit to Level “I” (Picture2)
No need of remote control. The main unit starts working after 8 seconds.
Preset default is air pressure + heat compression + music + 15 minutes
duration.
Power OFF – The main unit automatically shuts off after 15 minutes.
Push the ON/OFF switch on the main unit to Level “O”.
No need of remote control. The main unit starts working after 8 seconds.
Preset default is air pressure + heat compression + music + 15 minutes
duration.
Power OFF – The main unit automatically shuts off after 15 minutes.
Push the ON/OFF switch on the main unit to Level “O”.
Power On/Off
Manual Mode (using the remote control)
1.
2.
3.
4.
4.
Power ON: Push the ON/OFF switch on the main unit to Level “I” (Picture2)
The main unit is powered by a high performance, environment-friendly lithium
battery.
Press and hold Button on the remote control
Preset default is air pressure + heat compression + music + 15 minutes
duration
Default air pressure: Mode 5 – circulates among Modes 1 to 4;
Default hot compress: low temperature;
Default Music: Well-being music
Power OFF: Press Button on the remote control.
Push the ON/OFF switch on the main unit to Level “O”
The main unit is powered by a high performance, environment-friendly lithium
battery.
Press and hold Button on the remote control
Preset default is air pressure + heat compression + music + 15 minutes
duration
Default air pressure: Mode 5 – circulates among Modes 1 to 4;
Default hot compress: low temperature;
Default Music: Well-being music
Power OFF: Press Button on the remote control.
Push the ON/OFF switch on the main unit to Level “O”
Power On/Off
4.
5.
6.
7.
8.
5.
6.
7.
8.
Take off contact lenses/eye glasses before use.
Put on/wear the unit first BEFORE turning the power on.
Do not use while walking or driving.
Keep your eyes closed for a few seconds after use, then open them slowly.
Keep the massager away from humidity, heat, and/or corrosive gas.
Put on/wear the unit first BEFORE turning the power on.
Do not use while walking or driving.
Keep your eyes closed for a few seconds after use, then open them slowly.
Keep the massager away from humidity, heat, and/or corrosive gas.
This massager features heat compression. Individuals who are incapable
of or do not ordinarily feel heat/cold sensation should use this device with
caution.
of or do not ordinarily feel heat/cold sensation should use this device with
caution.
This device complies with Part 15 of the FCC Rules. Operation is subject to
Please note that changes or modifications not expressly approved by the
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
the following two conditions: (1) this device may not cause harmful
party responsible for compliance could void the user’s authority to operate
the equipment.
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio ommunications.
However, there is no guarantee that interference will not occur in a
will not occur in a particular installation. If this equipment does cause harmful
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio ommunications.
However, there is no guarantee that interference will not occur in a
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception,which can be determined by
turning the equipment off and on,the user is encouraged to ry to correct
the interference by one or more of the following measures:
the interference by one or more of the following measures:
This equipment has been tested and found to comply with the limits for a
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
439