Shenzhen Breo Technology Co. Ltd IDREAM3 Manuale Utente

User Manual

Main Unit and Remote Control

1 Main Unit, 1 Controller, 1 Power Charger, 3 Batteries, 1 User Manual, 
1 Set of Earphones, 1 USB Cable

Thank you for purchasing Breo iDream3.
Please read this manual carefully before using the product, 
and keep it in a safe place for future reference. 

For relief of minor aches and pains

iDream3 adopts air pressure, vibration, and hot compress massaging 
technology to massage the head and ocular regions. It comes with a wireless 
remote control and built-in MP3 player. You can now enjoy wonderful music 
while massaging, further relaxing your head and eyes.

3

Power on 

Open the battery cover on the back of the remote control.
Place 3 AAA batteries in accordance with the positive and negative 
poles.
Close the battery cover. (Picture1)

Music Downloading

Connect the main unit to computer using the supplied USB cable;
Push the power protection key on the main unit to Level “I”;
Copy MP3 music to the device. 

Wear 

Use the back dial to adjust the distance between head to establish the 
most comfortable fit, and wear main unit.
Use the top dial in setting the distance above head.

(picture 1)

to Level “I”

(picture 2)

Please make sure that one main unit is corresponding to one remote 
controller. The operation of encoding joint with multiply remote controller to 
the main unit is prohibited.

EYE & HEAD MASSAGER

Main Unit

Controller

LCD Screen
ON/Off    
Operating Buttons 
Air discharge
DC power interface
Earphone Jack 

Power Switch Protection key 
Encoding Key 
USB Port
Size Adjusting Knob
Tightness Adjusting Knob

Pressure Reduction Valve

 DC Power Port

LCD Screen：From top to bottom: Time /Air Pressure/Vibration/Hot Compress/Music
Operating Button:Clockwise: Up Button/Function Mode Next/Down Button
                                                    /Function Mode Previous
                                Center: OK Button
Power switch protection key: Push left or right to turn ON/OFF
MUST push power switch to Level “O” after each use 

Important: Make sure that only one device is paired with the remote control. Multiple 
pairing of remote control and main unit is strictly prohibited.

In case of problem with connection between the main unit and remote 
control, you can perform joint encoding operation:

Turn the remote control off, and push the power switch of the main
unit to level “O”;
Press and hold [8] encoding key of the main unit. While still holding 
it, push the power switch of the main unit to level “I” to turn it on; 
The blue LED indicator on the front of the main unit flashes.

and 

lights up while the main unit’s blue LED indicator turns off-it means
the encoding is successful (This step should be completed within 6 

Release [8] encoding key, and simultaneously press the

keys of the remote control for 2-3 seconds. The remote control LCD

seconds). If unsuccessful, repeat from the start.
Push the power switch of the main unit to level “O”, then back to
level “I”. Both the main unit and remote control should now be 
working.

Prior to use, check the integrity of the machine and accessories:

No damage on power charger
Battery power is sufficient

Push the power switch on the main unit to Level “O”. Keep the massager 
turned OFF while charging. Charging time is approximately 3-4 hours.
If the massager is turned on while recharging, all functions of the product 
will run normally. The machine will automatically stop charging to 
prevent damage to the device.
If the power of the battery is lower than 3.2  0.1V, the machine will 
automatically turn off. If the LED indicator of the main unit flashes, it 
means the lithium battery is low. Recharge the main unit.

+

Manually operate related buttons to select air pressure mode, vibration mode, 
hot compress temperature, change music and/or massage duration.

To clean, wipe with aseptic cotton and alcohol. Do not wash or
immerse in water.
This product is not a substitute for healthcare professionals' advice
and treatment. In case of doubt or if necessary, please consult your
healthcare professional.
Please use ONLY the DC4.5V power charger that comes with the
package, and handle it with care.
It is very IMPORTANT to turn the power of the main unit OFF after
each use and before storage to avoid damage to the machine.

Problem

Possible Reason

Possible Solution

Power-On Failure

Weak air pressure
or vibration

Lithium battery of the main unit 
is low

Lithium battery of the main 
unit is low

Recharge the main unit at once

Remote control batteries are 
low/ out

Change batteries

Remote control batteries are not 
installed correctly

Check if positive/negative poles of 

batteries are positioned right

Make sure the batteries are snug in 

place

Recharge the main unit at once

Power Switch Protection key 
is not turned on

Push this key to Level “I”

Ideal 

Environment：

Temperature 5℃～40℃   Relative Humidity ≤80%

Main Unit：L282mm  X  W206mm  X  H254mm

Controller ：L132mm  X  W44mm  X  H24mm

Net Weight：

DC/Power：

Atmospheric Pressure: 860hpa～1060hpa

 1125g

Dimension：

  DC: 4.5V

 Power: 4.5W

When operational problems occur, please refer to the chart below.
Do not disassemble the machine or try to repair it by yourself.

If left unused, checking the product/turning the power on every 6 months is 
recommended.
Do not store near the floor, wall or roof.
Maintain good ventilation and keep away from direct sunlight and corrosive 
gases.

Made in China

Manufactured by: Shenzhen Breo Technology, Co., Ltd.

Company Address: Jinshan Bldg., No. 5033, Shennan East Road, Shenzhen, 

518008, China 

Please read the manual carefully and operate accordingly.
Children under 7 years old cannot use the massager.
This massager should not be used by:
a. People who suffer from brain disease or have undergone brain surgery
b. People who are suffering from glaucoma, retinoschisis or other serious
    eye diseases
c. People who have physical or mental disorder

Attention:
When you feel the air pressure is too much and/or uncomfortable, press the 
Pressure Reduction Valve on the main unit to release air.

If the massager will not be used for a long time, remove the batteries to
avoid battery leakage.

Time   
—  Press                       Button to select “Time”
—  Press                       Button to select massage duration 
       15 minutes/10 minutes/5 minutes

Press                        Button to choose  

— Press         Button to turn on/off  a function
— Press                    Button to select air pressure mode, vibration mode, hot 
compress temperature, change music and/or massage duration

among functions

(Time, Air Pressure, Vibration, Heat, and Music)

Vibration 
— Press                        Button to select “Vibration”,then Press         Button
— Press                        Button to select from the 5 different modes of vibration
—Off/On: Press           Button to turn off/on Vibration

Heat compression
— Press                       Button to select “Heat Compression”
— Press                       Button to select low temperature or high temperature
— Off/On: Press          Button to turn off/on Heat Compression

Air pressure 
—  Press                       Button to select “ Air Pressure”
— Press                        Button to select from the 5 different modes of air pressure
      (Preset Default: Mode 5 – circulates among Modes 1 to 4)        
— Off/On: Press          Button to turn off/on Air Pressure

Music
—  Press                       Button to select “Music”,then Press          Button
—  Press          Button  to go to the next one  
        (Preset Default – circulates among pre-recorded music)       
—  Press          Button to go to the previous one
— Press and hold          Button: Volume up
— Press and hold          Button: Volume down
— Off/On: Press          Button to turn off/on Music
— Press and hold        Button to switch over between built-in music and MP3 
      music

Manual

Power Charger

Earphones

Batteries

USB Cable

Charging of Main Unit

Open the cover of the DC power port on the main unit.
Insert the plug of the power charger to the DC port.
During charging, the light of the power charger is red. The light turns green 
when fully charged.

Operation

Automatic Mode (without the remote control)

Power ON – Push the ON/OFF switch on the main unit to Level “I” (Picture2)
No need of remote control. The main unit starts working after 8 seconds. 
Preset default is air pressure + heat compression + music + 15 minutes 
duration. 
Power OFF – The main unit automatically shuts off after 15 minutes. 
Push the ON/OFF switch on the main unit to Level “O”.

Power On/Off

Manual Mode (using the remote control）

Power ON: Push the ON/OFF switch on the main unit to Level “I” (Picture2) 
The main unit is powered by a high performance, environment-friendly lithium 
battery.
Press and hold          Button on the remote control 
Preset default is air pressure + heat compression + music + 15 minutes 
duration
Default air pressure: Mode 5 – circulates among Modes 1 to 4;
Default hot compress: low temperature;
Default Music: Well-being music 
Power OFF: Press         Button on the remote control.   
Push the ON/OFF switch on the main unit to Level “O”

Power On/Off

Take off contact lenses/eye glasses before use.
Put on/wear the unit first BEFORE turning the power on.
Do not use while walking or driving.
Keep your eyes closed for a few seconds after use, then open them slowly.
Keep the massager away from humidity, heat, and/or corrosive gas.

This massager features heat compression.  Individuals who are incapable 
of or do not ordinarily feel heat/cold sensation should use this device with 
caution.

       This device complies with Part 15 of the FCC Rules. Operation  is subject to 

      Please note that changes or modifications not expressly approved by the

–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help

     the following two conditions: (1) this device may not cause harmful 

      party responsible for compliance could void the user’s authority to operate  

   the equipment.

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can radiate   
radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio ommunications. 
However, there is no guarantee that interference will not occur in a 
will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception,which can be determined by

 turning the equipment off and on,the user is encouraged to ry to correct 
 the interference by one or more of the following measures:

       This equipment has been tested and found to comply with the limits for a 

     interference, and (2) this device must accept any interference received, 

    including interference that may cause undesired operation.

439