Netgear 08200086 User Manual
NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual
4-6
Management
v1.0, June 2008
1. From the main menu of the browser interface, select Maintenance > Reset and then Reboot
AP on the side menu. The Reboot AP screen displays (Figure 4-5):.
Figure 4-5 Reboot the AP
2. Select the Yes radio button next to the Reboot option, and then click Apply.
Warning: Do not try to go online, turn off the Access Point, shut down the
computer or do anything else to the Access Point until it finishes
rebooting. When the power light turns green, wait a few more
seconds before doing anything with the Access Point.
rebooting. When the power light turns green, wait a few more
seconds before doing anything with the Access Point.
To erase the current settings and reset the wireless access point to the original factory default
settings:
settings:
1. In Step 1 of the previous section, select Restore Defaults from the side menu (see
).
2. Select the Yes radio button next to the Restore to factory default settings option.
3. Click Apply.