Microsoft Corporation CU-13R User Manual
I n s t a l l a t i o n
36
2. Set the display to the appropriate position (2).
3. To adjust the angle of the mounting plate, loosen the screw at one
end of the hinge on the plate, turn the plate (in steps of 45 degrees),
and tighten the screw.
and tighten the screw.
To detach the display, slide it upwards from the mounting plate.
■ Installer settings
The installer settings should only be modified by a qualified service
technician.
technician.
In standby mode, press and hold the power key for about 10 seconds,
and select from the following:
and select from the following:
•
DSP settings
—
Select the set of audio settings that suits best. To
activate the new settings, you may need to switch the car kit off and
back on.
back on.
•
Microphone settings
—
Select whether you want to use the built-in
microphone or an optional external microphone.
■ Integration with a car radio system
The car kit can be connected to a car radio system in three different
ways. Select the appropriate option according to the parts supplied in
the sales package.
ways. Select the appropriate option according to the parts supplied in
the sales package.
For information about the connectors on the junction box RX-73, see
“Junction box RX-73”, p. 32.
“Junction box RX-73”, p. 32.
1
2