Microsoft Corporation CU-13R 사용자 설명서

2. Set the display to the appropriate position (2).

3. To adjust the angle of the mounting plate, loosen the screw at one 

end of the hinge on the plate, turn the plate (in steps of 45 degrees), 
and tighten the screw.

To detach the display, slide it upwards from the mounting plate.

■ Installer settings

The installer settings should only be modified by a qualified service 
technician.

In standby mode, press and hold the power key for about 10 seconds, 
and select from the following:

•

—

Select the set of audio settings that suits best. To 

activate the new settings, you may need to switch the car kit off and 
back on.

•

—

Select whether you want to use the built-in 

microphone or an optional external microphone.

■ Integration with a car radio system

The car kit can be connected to a car radio system in three different 
ways. Select the appropriate option according to the parts supplied in 
the sales package.

For information about the connectors on the junction box RX-73, see 
“Junction box RX-73”, p. 32.

1

2