Microsoft Corporation NHL-4J User Manual

[ 80 ]

Call and check your voicemail as you normally would.

Write down your interaction with the recorded prompts step-by-step. 
Keep in mind that each voicemail service may vary. However, it should 
look something like this:

Important: Be precise, you’ll need this information in “Setup 
voicemail with dialing codes” later in this section.

LEARN HOW TO INSERT DIALING CODES
Press the Star key repeatedly to cycle through dialing codes. Once the 
desired code appears in the display, pause briefly and the code is inserted 
into the dialing string.

For example, press the Star key four times to display the “w” (wait 
character). Pause briefly and the wait character is inserted into the dialing 
string. Available dialing codes are as follows:

At the

Start screen, press Names, scroll to 1-touch dialing, and 

press Select.

Scroll to an empty 1-touch dialing slot and press Assign.

Enter your voice mailbox number, including the area code.

Refer to the table entitled “dialing codes,” and enter any codes as 
necessary using the information that you wrote down earlier.

Bypasses a set of instructions

Precedes an international telephone number

Pauses for 2.5 seconds before sending any numbers that follow

Wait. Your phone waits for you to press the Talk key before it 
sends any numbers or codes that follow.