Schulte-Schlagbaum AG LSW User Manual
Guide
SAFE-O-TRONIC
®
access
LSW
Schulte-Schlagbaum AG
Page 9 of 28
LSW_6-703-2 33S1 3.docx
Programming Master Code 2 for the LSW200 and LSW400
Every SAFE-O-TRONIC® access LSW200/400 can be programmed for commissioning using Mas-
ter Code 2. Master Code 2 can be freely selected and contain 5 to 10 digits.
Note: Please ensure that unauthorised persons do not obtain the programmed Master
Code 2!
Note: Master Code 2 cannot be programmed using a leading 0!
Note: Master Code 2 can only be programmed in conjunction with Lock Manager 6
software.
Master Code for LSW200 and LSW400
Master Code 1
Master Code 1 is only used by the system operator/personnel to unlock the LSW200/400. It is in-
tended for personnel with restricted locking permissions.
After being unlocked, the LSW200/400 is blocked from use of a new User Key.
This block first needs to be reset with Master Code 2. Master Code 1 can be freely selected and
contain 5 to 10 digits.
tended for personnel with restricted locking permissions.
After being unlocked, the LSW200/400 is blocked from use of a new User Key.
This block first needs to be reset with Master Code 2. Master Code 1 can be freely selected and
contain 5 to 10 digits.
Note: Master Code 1 cannot be programmed using a leading 0!
Unlocking using Master Code 1
If Master Code 1 has been programmed using Lock Manager 6 software, the system operator can
unlock the LSW200/400 at any time by means of this code.
After being unlocked, the LSW200/400 is blocked from use of a new User Key.
►
Enter Master Code 1
Note: 9, 0, 6, 0, 9 is only a sample code!
►
Then press the OK key
9
6
0
9
0