Schulte-Schlagbaum AG LSW User Manual
Guide
SAFE-O-TRONIC
®
access
LSW
Schulte-Schlagbaum AG
Page 7 of 28
LSW_6-703-2 33S1 3.docx
Commissioning
All SAFE-O-TRONIC
®
access LSW furniture locks are supplied with the same factory settings. With
these factory settings, the Test Key for the LSW300, and the Test Key and Test Code for the
LSW200 and LSW400 are active for locking and unlocking.
LSW200 and LSW400 are active for locking and unlocking.
Test Key
Once installed, test the function of the SAFE-O-TRONIC
®
access LSW using the Test Key (Test
Code).
In particular, ensure ease of movement of the bolt during locking and unlocking of the door. Installa-
tion of the lock under tension can result in malfunction.
Once all installation activities are complete and SAFE-O-TRONIC
In particular, ensure ease of movement of the bolt during locking and unlocking of the door. Installa-
tion of the lock under tension can result in malfunction.
Once all installation activities are complete and SAFE-O-TRONIC
®
access has been tested, the fur-
niture locks in the LSW range can be programmed.
Note: The Test Key remains the same until commissioning (programming).
To read RFID data media, the LSW200 must first be
To read RFID data media, the LSW200 must first be
activated by pressing the “OK”
and “Abort” keys simultaneously.
Test Code for LSW200 and LSW400
You can use the Test Code to perform a simple function check of the SAFE-O-TRONIC
®
access
LSW.
Locking and unlocking using the Test Code
Locking and unlocking using the Test Code
►
Press the 0 key
►
Then press the “OK” key
►
The motorised bolt is activated
Note: The Test Code remains the same until commissioning (programming).
Always perform the first function check when the cabinet door is open.
Door detection by the sensing slide only becomes active after programming.
Door detection by the sensing slide only becomes active after programming.
0