Schulte-Schlagbaum AG SOT02 User Manual

¥  

1 x green

(3 Sec)

•

 

Reset-Indicator (e.g. first activation after battery replacement)

¥  

1 x green

•

 

OK (Action was successfully completed)

¥ 

1 x red

•

 

Unknown megaKey Type

•

 

Action is only allowed on unlocked SAFE-O-TRONIC e.g. ResetKey or
SetupKey.

•

 

The present free-megaKey has locked another SAFE-O-TRONIC.

•

 

fixed-megaKey, multi-megaKey or ProgKey is not assigned to this SAFE-
O-TRONIC

¥ 

2 x red

•

 

SAFE-O-TRONIC is in new or in reset state (e.g. after using ResetKey)

•

 

TestKey or SetupKey was used at an initialised SAFE-O-TRONIC

¥

 3 x red

•

 

megaKey is admitted at another SAFE-O-TRONIC System.

•

 

megaKey or MasterKey are assigned to another group

¥

 4 x red

•

 

Time limit or valid period exceeded

•

 

The megaKey is in moment not admitted at this SAFE-O-TRONIC

¥

 5 x red

•

 

The Key-Generation stored on the MasterKey or multi-megaKey or Sys-
temKey is no longer valid for this SAFE-O-TRONIC.

¥

 6 x red

•

 

Handling error: SAFE-O-TRONIC was not locked after a actuation with a
valid megaKey

•

 

Mismatched type of megaKey and megalock operating mode (e.g. free-
megaKey at SAFE-O-TRONIC in fixed cabinet assignment or fixed-
megaKey at SAFE-O-TRONIC in free cabinet selection, etc. ...).

•

 

ProgKey at a SAFE-O-TRONIC which doesn't work in Matrix-Mode.

•

 

ClockSetKey or DSTKey at SAFE-O-TRONIC with disabled real time
clock.

•

 

Data on megaKey are incorrect or corrupt (e.g. megaKey was to short in
detection range of the SAFE-O-TRONIC)

¥

 ... 

¥

3 x red .. green ....

•

 

Battery alarm
Before SAFE-O-TRONIC could used again the battery must be replaced.

¥ 

& 

¥

3 x red & green

•

 

SAFE-O-TRONIC is blocked after MasterKey I was used. Use MasterKey
II to unblock SAFE-O-TRONIC for further activation's

l 

& 

l

constant
red&green

•

 

Internal Failure