Schulte-Schlagbaum AG SOT02 用户手册
SAG
SAFE-O-TRONIC
Installation
Schulte- Schlagbaum AG
Page 14 of 14
SOT-manual.DOC
ANHANG C: LED Blink-Codes
LED Signal
Description
¥
1 x green
(3 Sec)
•
Reset-Indicator (e.g. first activation after battery replacement)
¥
1 x green
•
OK (Action was successfully completed)
¥
1 x red
•
Unknown megaKey Type
•
Action is only allowed on unlocked SAFE-O-TRONIC e.g. ResetKey or
SetupKey.
SetupKey.
•
The present free-megaKey has locked another SAFE-O-TRONIC.
•
fixed-megaKey, multi-megaKey or ProgKey is not assigned to this SAFE-
O-TRONIC
O-TRONIC
¥
2 x red
•
SAFE-O-TRONIC is in new or in reset state (e.g. after using ResetKey)
•
TestKey or SetupKey was used at an initialised SAFE-O-TRONIC
¥
3 x red
•
megaKey is admitted at another SAFE-O-TRONIC System.
•
megaKey or MasterKey are assigned to another group
¥
4 x red
•
Time limit or valid period exceeded
•
The megaKey is in moment not admitted at this SAFE-O-TRONIC
¥
5 x red
•
The Key-Generation stored on the MasterKey or multi-megaKey or Sys-
temKey is no longer valid for this SAFE-O-TRONIC.
temKey is no longer valid for this SAFE-O-TRONIC.
¥
6 x red
•
Handling error: SAFE-O-TRONIC was not locked after a actuation with a
valid megaKey
valid megaKey
•
Mismatched type of megaKey and megalock operating mode (e.g. free-
megaKey at SAFE-O-TRONIC in fixed cabinet assignment or fixed-
megaKey at SAFE-O-TRONIC in free cabinet selection, etc. ...).
megaKey at SAFE-O-TRONIC in fixed cabinet assignment or fixed-
megaKey at SAFE-O-TRONIC in free cabinet selection, etc. ...).
•
ProgKey at a SAFE-O-TRONIC which doesn't work in Matrix-Mode.
•
ClockSetKey or DSTKey at SAFE-O-TRONIC with disabled real time
clock.
clock.
•
Data on megaKey are incorrect or corrupt (e.g. megaKey was to short in
detection range of the SAFE-O-TRONIC)
detection range of the SAFE-O-TRONIC)
¥
...
¥
3 x red .. green ....
•
Battery alarm
Before SAFE-O-TRONIC could used again the battery must be replaced.
Before SAFE-O-TRONIC could used again the battery must be replaced.
¥
&
¥
3 x red & green
•
SAFE-O-TRONIC is blocked after MasterKey I was used. Use MasterKey
II to unblock SAFE-O-TRONIC for further activation's
II to unblock SAFE-O-TRONIC for further activation's
l
&
l
constant
red&green
red&green
•
Internal Failure