Radwin Ltd. WINLINK User Manual

 

Error Detection 

5-1 

This chapter describes the AirMux-104 diagnostic functions, which include: 
•  Status indications, alarms, power-up self-test 
•  Statistics collection 
•  Diagnostic tests (local and remote loopbacks on E1 link). 

AirMux-104 performs a hardware test of the RTCB upon turn-on. This self-test 
checks the critical circuit functions of the unit. The RTCB LED indicates results of 
the self-test (see 

 for the LED description). 

AirMux-104 detects fault conditions of the radio and user links and initiates alarms 
to alert the user. The user can save alarm log as a TXT file. 
Alarms are displayed in the alarm logger (see 

Alarm logger includes the following fields: 
•  Alarm sequential number 
•  Date and time stamp 
•  Alarm message 
•  Alarm source (local or remote RT) 
•  IP address of the RT that initiated alarm. 

Radio Link – Sync 

Radio link is synchronized 

Radio Link – Out Of Sync 

Radio link lost synchronization 

Device Resetting 

RT was reset due to internal problem 

E1 Interface – Normal 

E1 interface is operating properly 

E1 Interface – LOS 

Loss of Synchronization is reported by E1 interface