CipherLab Co. Ltd. 1660 User Manual
15
Update
Chapter 1
!
Ζ
CLEAR DATA & CONFIRM
Even though data has been sent back to the server, the flash memory is still occupied
unless you erase the memory by having the scanner read two labels – “Clear Data” and
“Confirm”.
unless you erase the memory by having the scanner read two labels – “Clear Data” and
“Confirm”.
1) Read the “Clear Data” label to clear the flash memory.
2) Read the “Confirm” label to confirm the action.
2) Read the “Confirm” label to confirm the action.
1.3 LED INDICATOR
The triple-color LED on top of the scanner is used to provide user feedback. For example,
the LED becomes solid red and goes off quickly (= Standby mode) upon powering on or
running out of transmit buffer. You may tell the difference by the beeps – for example,
you will hear a long beep of high tone when powering on the scanner, and a long beep of
low tone when the transmit buffer becomes full.
the LED becomes solid red and goes off quickly (= Standby mode) upon powering on or
running out of transmit buffer. You may tell the difference by the beeps – for example,
you will hear a long beep of high tone when powering on the scanner, and a long beep of
low tone when the transmit buffer becomes full.
LED – Red/Green/Blue
Meaning
Green, and goes off quickly, and
becomes red, and finally goes off
when the [Delete] key is
released.
becomes red, and finally goes off
when the [Delete] key is
released.
Power off
Red, and goes off quickly
Power on, with one long beep (high tone)
Transmit buffer full, with one long beep (low tone)
Memory full, with two short beeps (low-high tone)
Bluetooth connection out of range, with two beeps
(high-low tone)
(high-low tone)
Green, and goes off quickly
Good Read, beeper pitch and duration programmable
Flashing blue (On/Off ratio 1:1)
No Bluetooth connection (flashing slowly)
Dynamic PIN code request from host (flashing quickly)
Flashing blue (On/Off ratio 1:6)
Bluetooth connection established
Flashing blue and red
Dynamic PIN code input error
Flashing red
Configuration Mode
Clear Data
Confirm