The Watt Stopper Inc. TDWALL User Manual
Groups
Use one or more wireless Miro
TM
remote switchs in conjunction with a
wireless Miro
wireless Miro
TM
dimmer or non-dim
(see list in the Applications section
above) to control one lighting circuit
from multiple locations. When you do
this, the dimmer works in exactly the
same way, from any of the control
locations.
above) to control one lighting circuit
from multiple locations. When you do
this, the dimmer works in exactly the
same way, from any of the control
locations.
After acquiring a house ID (see above)
Group Devices must be bound together:
1. Go to the nearest device in the group and
press Ú for 2 seconds. The device LED
starts flashing yellow, and all other
devices in the house start flashing green.
2. Go to the other devices to be bound into
the group and press Ú on each one.
Their LEDs will start flashing yellow,
indicating that they have joined the group
(made a mistake? Press Ú a second time
to deselect from the Group).
3. Return to the first device and press Ú for
2 seconds to terminate Group binding. All
LEDs revert to green. Now, all the
devices in the Group control the load
circuit, in exactly the same manner.
Go!
Use
Figure 3
On any device in the group:
1. Touch × momentarily to fade the load
circuit to its last-used level – tap twice for
full bright
2. Press and hold × to increase the present
level (dimmers only)
3. Touch Ø momentarily to turn the circuit
OFF
4. Press and hold Ø to decrease the
present level (dimmers only)
IMPORTANT – Air Gap Isolation: to isolate
the load for relamping, press Ø FIRMLY, so
that the paddle latches in, and the status
LED is extinguished, indicating that it’s safe
to relamp. To release and return to normal
operation, press ×. This can only be done
at the dimmer or non-dim device to which
the load is connected.
Scene
Control
Figure 5
The wireless Miro
TM
control Group may be
easily incorporated into room preset and
whole house lighting control schemes.
Instructions for installation and use are
Instructions for installation and use are
included with the relevant wireless Miro
TM
room and whole house control devices.
For more information on
For more information on
designing, installing and using
wireless Miro
TM
lighting control
systems, visit our website at
www.passandseymour.com/miro
Neutral
Dimmer
Remote
switch
Remote
switch
Hot
Dimmer Dimmer Scene
Controller
Hot
Neutral
1, 2
3, 4
1, 3
2
2
Example – 2 remote switches
and a dimmer make up a true 4-
way control circuit.