SMART Technologies 7086 User Manual
APPENDIX B
REMOTELY MANAGING THE DISPLAY
REMOTELY MANAGING THE DISPLAY
93
Volume
Get command
Set command
Response
get volume
set volume[Value]
Where [Value] is one of the following:
l
+[Value]
l
-[Value]
l
=[0–100]
volume=[Value]
Where [Value] is a number between 0
and 100
and 100
Mute
Get command
Set command
Response
get mute
set mute[Value]
Where [Value] is one of the following:
l
=on
l
=off
mute=[Value]
Where [Value] is one of the following:
l
on
l
off
Firmware version
Get command
Response
If one display is connected
get fwversion
fwversion=[Value]
Where [Value] is the firmware version.
If multiple displays are connected
[Display],@ get fwversion
Where [Display] is the display’s label (A, B, and so on).
@,[Display] fwverversion=[Value]
Where
l
[Display] is the display’s label (A, B, and so on).
l
[Value] is the firmware version.
Serial number
Get command
Response
get serialnum
serialnum=[Value]
Where [Value] is the serial number.
NOTE
If multiple display are connected, the response includes
the serial numbers for all displays separated by commas.
the serial numbers for all displays separated by commas.