Tagsys S.A. LSP3CLEAR-L40 User Manual
December 2009
Revision 2.1
41/68
Modifying TCP/IP configuration (including port)
Fill the fields with the appropriate values and click “Apply Changes”. You can then decide to apply
the new TCP/IP configuration immediately by rebooting the pedestal, or to wait for next reboot to
apply it.
the new TCP/IP configuration immediately by rebooting the pedestal, or to wait for next reboot to
apply it.
5.4.4 Monitoring Pedestal Activity
Figure 20: Pedestal Monitoring Tab
When upgrading both System and Radio firmware, it is advised to reboot
the pedestal only once after both upgrades are completed.
the pedestal only once after both upgrades are completed.
The EAS detection is suspended during the upgrade process.
Do not power-off pedestal during the upgrade process. Failure to respect
this procedure may corrupt pedestal firmware and require product to be
sent back to TAGSYS.
this procedure may corrupt pedestal firmware and require product to be
sent back to TAGSYS.
In case of a software failure during the upgrade process, do not power-
off the pedestal, restart the configuration software and try upgrading the
pedestal again.
off the pedestal, restart the configuration software and try upgrading the
pedestal again.