Tagsys S.A. LSP3CLEAR-L40 User Manual
December 2009
Revision 2.1
55/68
5.5 People Counter & Buzzer Sound Management
5.5.1 Resetting the Counter Display
Figure 32: People Counter & Detection Cells Location
To reset the LCD display use a pointed element (for example: a paper clip). Insert it in the hole on
the right of the display window and press (not too hard) until you get zero displayed. This will also
reset the battery backed-up counter.
the right of the display window and press (not too hard) until you get zero displayed. This will also
reset the battery backed-up counter.
5.5.2 Resetting the Remote People Counter
See section Checking / Configuring people counter of 5.4.4 Monitoring Pedestal Activity for more
information.
information.
5.5.3 Adjusting the Level of the Buzzer Sound
Using a flat headed 4mm screw driver (less than 4mm max diameter) through the outermost left
hole, adjust the buzzer sound to the desired level turning clockwise or anticlockwise.
hole, adjust the buzzer sound to the desired level turning clockwise or anticlockwise.
To trigger the alarm during the trimming operation, either use a book with an EAS set label or
depress the Test Button on the Basic Configuration Tab of the LSP3 Configuration Tool.
depress the Test Button on the Basic Configuration Tab of the LSP3 Configuration Tool.
Buzzer Level
Adjust
Counter Reset
Button
LCD Counter
Display