Tagsys S.A. L200TUNANT500 User Manual
Operation
November 2007
Revision 1.0
27/45
6 Operation
6.1 Starting the System
• To power on the system, switch on the main power switch.
• To start and stop the conveyor, use the red and yellow pushbuttons. If in standalone mode,
• To start and stop the conveyor, use the red and yellow pushbuttons. If in standalone mode,
the reading will start and stop automatically as a batch of items is going through the tunnel.
Tags ID will also be transmitted automatically on the serial link.
Tags ID will also be transmitted automatically on the serial link.
Left picture shows the main power switch located on the edge of the electric cabinet.
Right picture shows the START/STOP push buttons for the conveyor.
Figure 4: Switches and push buttons
6.2 Normal Operation
No operating procedures are required. The system continues to operate as long as power is
supplied.
supplied.
6.3 Shutdown
Stop the conveyor by pressing the red pushbutton, and then turn off the main power switch.
Figure 5: Emergency button
Avoid letting the conveyor running all day long if not necessary.
In case of emergency push the red button located at the top of the electric cabinet to stop the
Tunnel reader conveyor.
Tunnel reader conveyor.
Press green button to
start conveyor
start conveyor
Press red button
to stop conveyor
to stop conveyor