Tagsys S.A. L200TUNANT500 User Manual
CONVEYOR TUNNEL READER User's Guide
28/45
Revision 1.0
November 2007
7 Using the L200 Explorer
The TAGSYS L200 Explorer is utility software that enables the user to identify the current smart
label reader system or system components (reader reference, firmware version, supported chips,
etc.) and to perform the following tasks:
label reader system or system components (reader reference, firmware version, supported chips,
etc.) and to perform the following tasks:
• Perform debug operations and reading tests
• Configure the reader for operation in Standalone mode
• DSP firmware upgrades
• Configure the reader for operation in Standalone mode
• DSP firmware upgrades
The L200 Explorer resembles a typical Windows
®
-based user interface. A Wizard function
is
provided to guide the user through each step of how to read or program specific smart labels
(tags).
(tags).
Figure 6: L200 Explorer
An on-line help function is included (CTRL+H).
For optimal performances during debug operations, the Lx00 reader must be connected via
the monitoring port, using a parallel cable (supplied), to the host PC running the L200
Explorer software.
However, a serial connection is also possible if the STX-E GemCore
the monitoring port, using a parallel cable (supplied), to the host PC running the L200
Explorer software.
However, a serial connection is also possible if the STX-E GemCore
®
application, version 2.0
or more recent, is downloaded into the Medio™ Lx00 Reader. In this case, performances may
be affected.
The STX-E Standalone mode can only be configured using the serial communication link.
be affected.
The STX-E Standalone mode can only be configured using the serial communication link.