Tagsys S.A. MEDIOL40 User Manual
Medio L40 - User's Guide
July 2013
2.3
31/56
Figure 11: TAGSYS Explorer workspace configured
4.7.3 Reading the UID of ISO 15693 tags
If you have not configured your device using the TAGSYS Explorer wizard as explained in section
4.7.1
Installing TAGSYS Explorer
, please do so before proceeding.
To start reading using the configuration the wizard has applied:
1. Click
button in the tool bar to turn the radio field on.
CAUTION: Make sure an antenna is plugged in the channel that will be used for reading
before turning the radio field on. Turning on the radio field on a channel without an antenna
reduces the lifetime of the reader.
before turning the radio field on. Turning on the radio field on a channel without an antenna
reduces the lifetime of the reader.
2. Click
button in the tool bar to start reading tags.
If the radio field is not turned on, TAGSYS Explorer will request your permission to turn it on;
click “OK” to accept. Again, make sure an antenna is plugged in to the channel before
accepting.
click “OK” to accept. Again, make sure an antenna is plugged in to the channel before
accepting.
3. Place ISO 15693 tags in the radio field of channel #1 antenna.
Tags appear in the “Read Events” panel as they are read. A counter indicates how many
times they have been read on each device’s channel since the read session beginning.
times they have been read on each device’s channel since the read session beginning.
RF/Reading controls
Read Events panel
Read and RF
Channels
Configuration panels
Channels
Configuration panels
ISO15693
Parameters and
Commands panel
Parameters and
Commands panel