Tagsys S.A. WIFILIBINVREAD User Manual
WiFi Inventory Reader
3 Introduction
3.1 Product Description
The WiFi Inventory Reader is specifically designed for RFID inventory operations in libraries
providing maximum ergonomics:
providing maximum ergonomics:
• The product consists of 2 parts; the RFID reader that can be worn on a belt or shoulder
strap and the inventory antenna (L-W1). This configuration guarantees minimal weight
when held at arm's length.
when held at arm's length.
• The inventory antenna (L-W1) is designed to inventory articles on high or low shelves
without the user having to twist himself or bend over, eliminating all back stress. Its flexible
antenna makes it easy to slide over books, hugging unaligned items on the shelf.
antenna makes it easy to slide over books, hugging unaligned items on the shelf.
• The reader exchanges data with the host application through a wireless connection using
the WiFi interface, providing the user complete freedom of movement.
The WiFi Inventory Reader is supplied power by a rechargeable battery pack providing a minimum
of 2 hours autonomous use in continuous operation. A second battery pack is also supplied
making it possible to recharge the first battery pack while the second one is in use. Switching
battery packs is a simple operation.
of 2 hours autonomous use in continuous operation. A second battery pack is also supplied
making it possible to recharge the first battery pack while the second one is in use. Switching
battery packs is a simple operation.
The reader's On/Off switch includes a light that lets the user know when the reader is switched on.
This light blinks when the batteries need recharging.
This light blinks when the batteries need recharging.
The WiFi Inventory Reader can be worn on a belt or shoulder strap. A belt clip and strap are
supplied with the reader for this use.
supplied with the reader for this use.
Figure 1: WiFi Inventory Reader
12/36
Revision 1.1c
June 2007