Tagsys S.A. WIFILIBINVREAD User Manual
WiFi Inventory Reader
4 Using the WiFi Inventory Reader
This section describes how to install the WiFi Inventory Reader.
4.1 Using the battery packs
Before use, the battery packs must be recharged. A pack can only be recharged once it is removed
from the reader. To remove the pack from the reader, slide the battery pack release button and
remove the pack as shown in the picture below.
from the reader. To remove the pack from the reader, slide the battery pack release button and
remove the pack as shown in the picture below.
Figure 2: Removing the battery pack
It is easier to remove the battery pack if the reader is held vertically, with the battery pack
release button facing upwards.
release button facing upwards.
Battery pack
release button
14/36
Revision 1.1c
June 2007