Gemalto M2M GmbH BGS5 User Manual

Page of 42
Cinterion
®
 Java Terminals Hardware Interface Overview
1 Introduction
15
EHSxT_BGS5T_HIO_v01
2014-02-26
Confidential / Preliminary
1
Introduction
This document
1
 describes the hardware of the Cinterion
®
 Java Terminals. The Java Terminals 
come in four variants depending on the included Cinterion
®
 module and the available interfac-
es:
EHS5T contains a Cinterion
®
 EHS5-E module and implements a USB 2.0 interface with a
USB-B connector as well as a 6-pole Western jack as plug-in power supply connector. Via
a Weidmüller GPIO connectors it also implements a RS-485 interface including power sup-
ply and ignition line.
EHS6T-USB contains a Cinterion
®
 EHS6 module and implements a USB 2.0 interface with
a USB-B connector and also a V.24 / V.28 RS-232 interface with a D-sub 9-pole female
socket as well as a 6-pole Western jack as plug-in power supply connector.
EHS6T-LAN contains a Cinterion
®
 EHS6 module and implements an Ethernet interface
with a RJ45 8-pin connector and also a V.24 / V.28 RS-232 interface with a D-sub 9-pole
female socket as well as a 6-pole Western jack as plug-in power supply connector.
BGS5T contains a Cinterion
®
 BGS5 module and implements a USB 2.0 interface with a
USB-B connector and also a V.24 / V.28 RS-232 interface with a D-sub 9-pole female
socket as well as a 6-pole Western jack as plug-in power supply connector. 
Wherever necessary and appropriate this document distinguishes between these four variants.
 gives a short overview of the available interfaces for the different Java Terminals.
The scope of this document includes interface specifications, electrical issues and mechanical 
characteristics of Java Terminals. It specifies standards pertaining to wireless applications and 
outlines requirements that must be adhered to for successful product design. The Java Termi-
nals are compact GSM/UMTS modems for the transfer of data in GSM/UMTS networks. Indus-
trial standard interfaces and an integrated SIM card reader allow using the Java Terminals 
easily as GSM/GPRS/UMTS terminals. 
1.  The document is effective only if listed in the appropriate Release Notes as part of the technical
documentation delivered with your Cinterion wireless product.
Table 1:  Cinterion
®
 Java Terminals overview
Module/Interface
EHS5T
EHS6T-USB
EHS6T-LAN
BGS5T
Cinterion
®
 m
odule
EHS5-E
EHS6
EHS6
BGS5
RS-232 (Sub-D)
-
USB (USB-B)
-
Weidmüller connector 
(GPIOs, SPI, I
2
C, RS-485)
 
(no RS-485)
 
(no RS-485)
 (no RS-485, 
no SPI)
Ethernet (RJ45)
-
-
-
Power supply (RJ11)
RF antenna