HIMS International Corporation H318B User Manual
300
The next item in the Bluetooth Device List menu is the “Exit” item. This
item will exit the Bluetooth manager program. To activate this item,
press “Space-m (dots 1-3-4)” or “F2” and then press “Space-1” or
“Space-4” to navigate to “Exit”. Then, press “Enter” on “Exit”. You can
also access the item while in the menu by pressing “z (dots 1-3-5-6)”
while you are in the Bluetooth Device List menu or at any time without
calling up the menu by pressing “Space-z (dots 1-3-5-6)”.
13.2 Bluetooth Service List
Once you know which remote Bluetooth device you want to connect to,
press “Space-1” or “Space-4” to navigate to the device you want to
connect to in the Bluetooth Device List, and then press “Enter” on the
device name. You will then hear, “Scanning for service. Please wait…”
Please note that no keys will work during scanning the devices. The
Braille Sense OnHand will begin scanning services that are available
from the remote Bluetooth device. The Braille Sense OnHand support
the services: LAN, FTP, ActiveSync, Serial port, Headset, Bluetooth
DUN. In order to access all of these functions, you must make sure
that the remote Bluetooth device is in Discoverable mode, and that all
services are enabled. It is possible to have certain services enabled on
your remote Bluetooth device, while having other services that are
disabled. For example, you could have LAN and FTP enabled, while
having ActiveSync and Serial Port disabled. If this is the case, then the
Braille Sense OnHand will only display LAN and FTP.
Once the Braille Sense OnHand has found all of the available services, it
will display the services in a list in the following format: “service name
xx/yy” where xx is the number of the service that you are on, and yy is
the number of total available services. You can move through the
available services by pressing “Space-1” or “Space-4”. You can press
“Backspace” to return to the Bluetooth Device List.
Once the Braille Sense OnHand has finished searching service, you can
access the menu by pressing “Space-m (dots 1-3-4)” or by pressing “F2”.
The “Bluetooth Service List menu” has the “Device Name”, “Open FTP”,
item will exit the Bluetooth manager program. To activate this item,
press “Space-m (dots 1-3-4)” or “F2” and then press “Space-1” or
“Space-4” to navigate to “Exit”. Then, press “Enter” on “Exit”. You can
also access the item while in the menu by pressing “z (dots 1-3-5-6)”
while you are in the Bluetooth Device List menu or at any time without
calling up the menu by pressing “Space-z (dots 1-3-5-6)”.
13.2 Bluetooth Service List
Once you know which remote Bluetooth device you want to connect to,
press “Space-1” or “Space-4” to navigate to the device you want to
connect to in the Bluetooth Device List, and then press “Enter” on the
device name. You will then hear, “Scanning for service. Please wait…”
Please note that no keys will work during scanning the devices. The
Braille Sense OnHand will begin scanning services that are available
from the remote Bluetooth device. The Braille Sense OnHand support
the services: LAN, FTP, ActiveSync, Serial port, Headset, Bluetooth
DUN. In order to access all of these functions, you must make sure
that the remote Bluetooth device is in Discoverable mode, and that all
services are enabled. It is possible to have certain services enabled on
your remote Bluetooth device, while having other services that are
disabled. For example, you could have LAN and FTP enabled, while
having ActiveSync and Serial Port disabled. If this is the case, then the
Braille Sense OnHand will only display LAN and FTP.
Once the Braille Sense OnHand has found all of the available services, it
will display the services in a list in the following format: “service name
xx/yy” where xx is the number of the service that you are on, and yy is
the number of total available services. You can move through the
available services by pressing “Space-1” or “Space-4”. You can press
“Backspace” to return to the Bluetooth Device List.
Once the Braille Sense OnHand has finished searching service, you can
access the menu by pressing “Space-m (dots 1-3-4)” or by pressing “F2”.
The “Bluetooth Service List menu” has the “Device Name”, “Open FTP”,