HIMS International Corporation H318B User Manual

302 

 

If there are no services connected to other Bluetooth devices, and you 
activate this function, you will hear, “There is no service connected”. 
 

 
To authenticate a service and connect to it, press “Enter” on the service.   
Once you have pressed “Enter” on the service, you will hear “Connecting 
service”.    Then, you will hear “PIN code:”    You must use ASCII 
characters when you type in this edit box.    On the Braille display, you 
will see “PIN code:”    This edit box will only appear when you have 
pressed enter on a service that not say “Connected” after the service 
name.      You can exit the edit box or cancel any text you have typed in 
by pressing “Space-z (dots 1-3-5-6)”.    You will then be returned to the 
Bluetooth Service List. 
 
If you have typed in a pin code, and have pressed “Enter”, you will hear, 
“Please wait for authentication”. If the remote device is setup correctly, 
and has not been set up to allow this device to always connect, then the 
remote device will ask for a pin code. If the remote Bluetooth device pin 
code matches the pin code that was typed in the Braille Sense OnHand, 
then the service will authenticate. If this occurs, you will hear, 
“ Connection succeeded”. Then, while the service connects, you will 
hear, “Please wait. Access permission”. If the remote Bluetooth device 
does not give access permission, then you will hear, “Connection failed”, 
and you will be returned to the Bluetooth Services List.    If the remote 
Bluetooth device gives you access permission, then the Braille Sense 
OnHand will say “Connection succeeded”. If the connection succeeds, 
then you will see “Connected” after the services that have successfully 
connected. Some of the service may be connected without inputting pin 
code depending on the Remote Bluetooth device settings. 
 
After you have connected to a service, you can press “Enter-d (dots 1-4-
5)” to disconnect the service, and the Braille Sense OnHand will say 
“Service disconnected”. You will then be returned to the Bluetooth 
Service List.    If you disconnect a service, “Connected” will disappear 
from the Bluetooth Service List.