Hunter Industries Inc SSW User Manual

®

For.the.PC.series.Pro-C.Modular.controller,.mount.the.Solar.Sync.module.on.the.

wall.next.to.the.controller.cabinet..There.is.an.additional.knockout.on.the.right.side.

of.the.controller.cabinet.to.route.Solar.Sync.wires.into.and.out.of.the.cabinet.
1... Connect.the.red wire.from.the.Solar.Sync.module.to.the.AC1.terminal
2... Connect.the.white wire.from.the.Solar.Sync.module.to.the.AC2.terminal
3... Connect.the.blue wire.from.the.Solar.Sync.module.to.the.REM.terminal
4... remove.the.flat.metal.jumper.from.the.two.SEN.terminals
5.. Connect.the.yellow wire.to.one.of.the.SEN.terminals
6... Connect.the.orange wire.to.the.other.SEN.terminal

Mount.the.Wireless.Receiver.on.the.controller.cabinet.using.the.options.described.on.page.8..Due.to.the.position.of.the.power.module.in.

the.Pro-C.controller,.a.more.convenient.option.may.be.to.mount.the.Wireless.Receiver.to.the.wall.using.the.Wall.Mount.Bracket.
1.. Make.sure.power.to.the.controller.is.turned.off
2... Connect.the.black.Receiver.wire.to.the.black.Module.wire
3... Connect.the.green.Receiver.wire.to.the.green.Module.wire.
4.. Initialize.communication.by.following.steps.outlined.in.“Addressing.Wireless.Receiver/Sensor”.section.on.page.13