Hunter Industries Inc SSW User Manual

The.X-Core.Controller.is.programmed.with.Solar.Sync.technology.and,.therefore,.

does.not.require.the.use.of.the.Solar.Sync.module..Simply.mount.the.Wireless.

Receiver.on.the.controller.cabinet.using.an.available.knock.out.and.secure.with.the.

supplied.conduit.nut..Or,.use.the.supplied.brackets.to.mount.the.Wireless.Receiver.

on.the.wall,.similar.to.the.Pro-C.installation.shown.on.page.8..Depending.on.the.

installation,.the.supplied.1.5".(3.8.cm).extender.may.be.required..Route.the.wires.

from.the.Wireless.Receiver.in.to.the.controller.cabinet.
1.. Make.sure.power.to.the.controller.is.turned.off
2... .Connect.the.black.Receiver.wire.to.the.“SEN”.Terminal.location.(it.does.not.

matter.which.“SEN”.terminal.is.used)

3... Connect.the.green.Receiver.wire.to.the.other.“SEN”.terminal.location.
See.X-Core.owner’s.manual.for.further.details.*

The.ACC.Controller.is.programmed.with.Solar.Sync.technology.and,.therefore,.does.not.

require.the.use.of.the.Solar.Sync.module..Simply.mount.the.Wireless.Receiver.on.the.

controller.cabinet.using.an.available.knock.out.and.secure.with.the.supplied.conduit.nut..

Or,.use.the.supplied.brackets.to.mount.the.Wireless.Receiver.on.the.wall,.similar.to.the.

Pro-C.installation.shown.on.page.8..Depending.on.the.installation,.the.supplied.1.5".

(3.8.cm).extender.may.be.required..Route.the.wires.from.the.Wireless.Receiver.in.to.the.

controller.cabinet.
1.. Make.sure.power.to.the.controller.is.turned.off
2... Connect.the.black.Receiver.wire.to.the.black.“ET”.terminal.on.the.master.module
3... Connect.the.green.Receiver.wire.to.the.green.“ET”.terminal.on.the.master.module.
See.ACC.owner’s.manual.for.further.details.*