Guillemot 5061156 User Manual
Hercules Wireless N Access Point HWNAP-300
2.7.1.Connecting to a network in master mode
Note: by default, your Hercules Wireless N Access Point is configured to master mode, meaning that it will
serve as the access point to which other WPS devices will be able to connect.
serve as the access point to which other WPS devices will be able to connect.
1
st
option: use the WPS button located on the Access Point
- On your WiFi access point: press the WPS button
O located on the
side of the access point.
You now have two minutes to connect your Hercules Wireless N USB
Key to the access point. You will not have to repeat this step the next
time you connect.
Key to the access point. You will not have to repeat this step the next
time you connect.
- Press the WPS button located on the side of the Hercules
Wireless N Key or the WPS button on a WPS-compatible device.
Wireless N Key or the WPS button on a WPS-compatible device.
2
nd
option: use the WPS button accessible in WiFi Manager N
- On the WiFi Manager N home page, press the
Automatic WiFi client connection (WPS) button.
Push-Button Configuration method (PBC) is
selected by default.
selected by default.
- Click the
connection button.
Alternatively:
- Select Personal Identification Number method
(PIN code).
- Enter the PIN code of the WPS device you wish to
connect.
- Click the
connection button.
To find out the PIN code for your WPS device, please
refer to section 4.3.3. Connecting to a network with
a PIN code in the user manual of your Hercules
Wireless N USB Key, or refer to the manual supplied
by the manufacturer of your WPS device.
refer to section 4.3.3. Connecting to a network with
a PIN code in the user manual of your Hercules
Wireless N USB Key, or refer to the manual supplied
by the manufacturer of your WPS device.
28/94 – User Manual