Bendix Commercial Vehicle Systems LLC TX433VM User Manual
SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/20/2000 Page 26 of 56
This manual is under review by SmarTire – DO NOT ISSUE
ICON Summary Table
Name
Icon
Description
Battery Indicator
Diagnostic mode, used to display battery
voltage for a selected sensor
Battery Text (“bat”)
Diagnostic mode, used to display battery
voltage for a selected sensor
Check Mark
Cold Pressure Setting
Programming Mode, Cold Pressure Setting
No data received
No data has been received (pressure, temperature or battery voltage)
Error Code (1)
Sensor fault detected
Error Code (2)
EEPROM fault
Error Code (3)
Oscillator fault
Alert
Display when a pressure alert has been detected. Used in
programming pressure alert limit.
programming pressure alert limit.
Low Pressure Warning
Display when a pressure warning has been detected. Used in
programming pressure warning limit.
programming pressure warning limit.
Numeric Display
Displays numerical value of pressure, temperature and other
functions.
functions.
Pressure Deviation
When on indicates that the numerical value of the display is a
pressure deviation.
pressure deviation.
Pressure Units
PSI
Pounds per square inch, Bars
Programming Mode
LCD unit is in programming mode.
Sensor Alarm
Sensor alarm is detected.
Slope
During programming mode, setting of slope
Temperature Units
ºC ºF
Celsius or Fahrenheit degrees are selected
Tire ID Learn
Inner part flashes during ID learn mode
Tire Position
Programmed
Programmed
Tire position programmed, no data received
Tire Position Signal
Received
Received
Programmed tire position has received pressure data. (Inner part is
on steady)
on steady)
Tire Rotation
Programming mode, tire rotation mode
Towing vehicle
indicator
indicator
At least one of the 10 towing vehicle sensors has transmitted
X Mark