Senao International Co Ltd AT30V321 User Manual
High-Speed Wireless Access Point
Version 1.0
Page 8 of 20
4 Web Configuration
4.1 Logging In
h To configure the Access Point through the web-browser, enter the IP address of the
Access Point (default: 192.168.1.1) into the address bar of the web-browser, and
press Enter.
press Enter.
h You will then see the login window. Enter admin as the User name and iktpw as
the Password and then click on the OK button.
h You can also change the username and password under the Administrator
Settings option. Refer to section 4.3.1 Administrator Settings
to change the
username and password.
h
4.2 Getting Familiar with the GUI
h After logging in, the first page that is displayed in the Status page.
h The GUI consists of three parts and is displayed in the image below:
h The GUI consists of three parts and is displayed in the image below:
A. Navigation Bar: used to navigate through the available options.
B. Main Page: used to view and configure the AP’s settings.
C. Top Right-hand Corner: quick buttons for Home, Exit, and Reset. Click on the
B. Main Page: used to view and configure the AP’s settings.
C. Top Right-hand Corner: quick buttons for Home, Exit, and Reset. Click on the
Home button to return to the status page. Click on the Exit button to logout, and
click on the Reset button to restart the AP.
click on the Reset button to restart the AP.