Senao International Co Ltd AT30V321 User Manual
High-Speed Wireless Access Point
Version 1.0
Page 9 of 20
4.3 System
h Click on the System link on the navigation bar, you will then see five options:
Administrator Settings, Firmware Upgrade, Configuration Tools, Factory Default,
and Rest. Each one is described in detail below.
and Rest. Each one is described in detail below.
4.3.1 Administrator Settings
h Click on the Administrator Settings link. On this page you can configure the user
name, password, system name and telnet.
h Set another username and password to restrict management access to the Access
Point.
h Username: enter a new user name.
h Password: enter a new password.
h System Name: enter a unique name for this device.
h Enable Telnet: place a check in this box if you would like to allow telnet access to
this device.
A
C
B