Data Critical Corporation AVTS1010 User Manual
AlarmView™ System User’s Guide
{insert part #} Page 8
§
Transmitter Power Supply (1 per transmitter, to 24)
§
Hospital-grade AC Power Cord (1 per transmitter, to 24)
§
Handheld Programmer (1)
§
Rechargeable AAA Battery Pack for Programmer (1)
§
Programmer Docking Station (1)
§
AC Adapter Cord for Programmer Docking Station (1)
§
Pager with Holder (up to 12)
§
AlarmView System User’s Guide
§
AlarmView System Administrator’s Manual (this manual)
System Features
Transmitter
The AlarmView Transmitter interfaces with a pulse oximetry
monitor. Alarm settings and parameters are entered in the
monitor – the transmitter itself does not screen or select alarms.
When the pulse oximeter goes into alarm, the transmitter detects
the alarm from the monitor, then transmits that alarm to an
assigned pager or pagers. The alarm is transmitted as a text
message to the pager(s). Data relayed includes patient bed
number, alarm type, and parameter values.
All transmitters and pagers in an AlarmView System operate on
the same defined frequency and baud rate.
monitor. Alarm settings and parameters are entered in the
monitor – the transmitter itself does not screen or select alarms.
When the pulse oximeter goes into alarm, the transmitter detects
the alarm from the monitor, then transmits that alarm to an
assigned pager or pagers. The alarm is transmitted as a text
message to the pager(s). Data relayed includes patient bed
number, alarm type, and parameter values.
All transmitters and pagers in an AlarmView System operate on
the same defined frequency and baud rate.
Top Panel