OKI ML3390 01091308*01256402 User Manual

Chapter 3: Paper handling

3-14

   Print position (M)

☞

To set the top of form to the standard setting, simultaneously
press the SHIFT and TOF buttons. There must be no paper in
the print path when doing this.

The top of form can be set differently for each type of paper feed,
irrespective of whether you are feeding cut sheets manually, us-
ing the cut sheet feeder (CSF) or using continuous paper.

The current print position is indicated by the »M« above the red line
located on the clear paper guard of the print head carriage.

Should you wish to find out
where the next printing position
will be, simultaneously press
the SHIFT and PRINT QUALITY
buttons. The print head carriage
will then move automatically to
the new printing position.

If, when printing on pre-printed
forms it is necessary to correct
the current printing position in
a horizontal direction or change
to the next printing position,
proceed as follows:

Make sure that the printer is ON LINE; the SEL lamp lights.

Simultaneously press the SHIFT and TEAR buttons and the
print head will move to the left. On pressing the SHIFT and
PARK buttons, the print head will move to the right.

The distance the print head moves between the individual printing
positions corresponds to the setting displayed under CHARACTER
PITCH

.