OKI ML3390 01091308*01256402 User Manual

Chapter 3: Paper handling

3-15

If this function is active, printed pages of continuous paper are
transported from the TOF position to the Form Tear-Off position to
allow you to tear them off there. To do this, the continuous paper
must be fed from the rear or via the additional bottom tractor feed
(accessory) from below.

☞

Do not use the »Form Tear-Off« function in conjunction with
continuous labels on backing paper or with multi-layer forms
as this can cause a paper jam.

Activate this function after setting the top of form position by
means of the menu item Form Tear-Off for the paper path Rear
Feed 

(rear of printer) or Bottom Feed (bottom tractor feed) by

changing it from Off to the required time pause. After a 500 ms, one
or two second pause without any further print data, the paper is
transported to the tear-off position. You can then tear off the paper
if you wish.

Serrated tear-off edge

The serrated tear-off edge,
which you can use when the top
part of the printer cover is fold-
ed forwards, is provided for
this purpose.

If further data is sent to the
printer, the page is pulled back
to the current printing position
or top of form.