Silverstone OP750 SST-OP750 User Manual

Product codes
SST-OP750
Page of 13
 
 
5
voltages should start to rise at about the same time. All outputs must rise monotonically. The +5V 
output needs to be greater than the +3.3V output during any point of the voltage rise. The +5V output 
must never be greater than the +3.3V output by more than 2.25V. Each output voltage shall reach 
regulation within 50 mS (T
vout_on
) of each other during turn on of the power supply. Each output voltage 
shall fall out of regulation within 400 mS (T
vout_off
) of each other during turn off. Figure 1 and figure 2 
show the turn On and turn Off timing requirement. In Figure 2, the timing is shown with both AC and 
PSON# controlling the On/Off of the power supply.     
Item Description 
MIN 
MAX 
 
Units 
T
v
out_rise
 
 Output voltage rise time from each main output.(+5Vsb < 
70mS) 
70 mS 
T
vout_on
 
 All main output must be within regulation of each other 
within this time. 
 50 
mS 
T
vout_off
 
All main output must leave regulation within this time 
 
400 
mS 
Table 10 – Output Voltage Timing 
 
 
                    Vout 
 
 
 
                      V1     
10% Vout
 
                               
                      V2 
 
                      V3 
 
                      V4 
 
 
                                                             
T
vout_on
                                                   
T
vout_off
                               
                               
T
v
out_rise
 
Figure 1 : Output Voltage Timing