Humax F2-1003 User Manual

8. Installation

Enable: Selects Enable if Dual LNB is used or 2 antennas are connected to the 22kHz tone

switch box.

Disable: Selects Disable if 22kHz Tone is not used.

DiSEqC Input

You can select DiSEqC switch.

①

Select DiSEqC Input using the ▲▼ button, and press

the <OK> or <Right> button.

Select the DiSEqC Swtich using the ▲▼ button, and

press the <OK> button.

You can select one option among Tone burst A~B,

DiSEqC A~D, DiSEqC A~D for 2.0 and Disable.

LNB Voltage

This receiver doesn’t provide this function.

8.2 Automatic Search

If you select the satellite to search channel according to the Antenna Setting, you can

automatically search the satellite without entering any other information. And You cannot

watch any programme without searching channel.

①

Select <MENU> button.

②

Select Installation using the ▲▼ button, and press the

<OK> or <RIGHT> button.

③

Select Automatic Search from Installation menu using

the ▲▼ button, and press the <OK> or <RIGHT>

button.

Satellite

You can select which satellite to search the channel.

①

Select Satellite using the ▲▼ button, and press the

<OK> or <RIGHT> button.

②

Select one of satellites using the ▲▼ button, and

press the <OK> button.