Intermec 074964 User Manual
PB42 Portable Receipt Printer User’s Guide
27
Serial Port Settings on the PB42
Parameter
Default Setting
Baud rate
115200
Data bits
8
Parity None
Stop bits
1
Flow control
Hardware
Note: The PB42 only supports CTS flow control. You must
disable DSR flow control in your printing application while
using serial communications with the PB42.
disable DSR flow control in your printing application while
using serial communications with the PB42.
To connect the PB42 to a PC
1
Connect the 8-pin circular DIN connector to the serial port
on the PB42.
on the PB42.
2
Connect the other end of the serial cable to a serial port on
the back of your PC or to a serial adapter on your CK60.
the back of your PC or to a serial adapter on your CK60.
Serial
cable
cable
Serial
port
port
Connecting the PB42 to the Serial Port of a PC