Intermec 074964 User Manual

You can cancel or stop a print job at any time during the 
printing process. You may find this feature helpful if you make a 
mistake entering data or send incomplete information. This 
procedure only works if you are in the process of sending a print 
job or the printer is currently printing a print job. Otherwise, 
pressing both buttons will print the configuration test page 
information. 

Press and hold the Feed and Radio buttons until the printer 
beeps. The printer prints out the message “Print Job(s) 
Cancelled by User” and asks you to wait a few seconds. 

Cancel the print job from the CK60, 700, or host PC. The 
PB42 clears the print job and warm boots or resets itself. 

Start sending print jobs to the PB42 again when you see the 
message “Printer Online.” 

You can download fonts, graphics and firmware upgrades to the 
PB42 from your handheld computer using files available from 
the Intermec web site. There are two ways to download files to 
your PB42: 

•  You can download a self-extracting cabinet files (.cab) to copy 

onto your handheld computer. When you double-click the 
.cab file, the handheld computer sends the files down to the 
PB42. 

•  You can download a SmartSystems bundle (.exe) to your PC 

and use SmartSystems Foundation to send the files down to 
multiple PB42s. SmartSystems Foundation is available from 
the Intermec web site at www.intermec.com/smartsystems. 

Download the PB42 font, graphics, or firmware upgrade .zip 
file from the Intermec web site to your desktop PC. 

Unzip the file on your desktop PC.