Trisquare Communications Inc. WBASE User Manual
20/20 WMIC
Operating instructions:
The MIC Transceiver has a 550 mA hour rechargeable battery pack accessible by
removing the belt clip and battery compartment cover . Prior to the first use the battery
should be charged for 12 to 15 hours. The MIC Transceiver can be charged through its
charge terminals located on the bottom of the unit while placed in the BASE Charger (20/20
WBASE).
The MIC Transceiver has a 550 mA hour rechargeable battery pack accessible by
removing the belt clip and battery compartment cover . Prior to the first use the battery
should be charged for 12 to 15 hours. The MIC Transceiver can be charged through its
charge terminals located on the bottom of the unit while placed in the BASE Charger (20/20
WBASE).
To synchronize or resynchronize the BASE Transceiver to one or two MIC Transceivers,
place the MIC Transceiver unit(s) into the BASE Chargers. Synchronization shall occur
automatically with any MIC transceiver(s) that are docked in the BASE.
When the MIC is inserted into the BASE charger, the MIC shall turn on if it is not already
on. If the MIC is already in the BASE when the BASE is powered on, the MIC shall turn on.
If 5 minutes passes with no activity, the MIC shall go to stop mode.
If a record session is active when a MIC is placed in the BASE, one of the following
conditions will apply:
place the MIC Transceiver unit(s) into the BASE Chargers. Synchronization shall occur
automatically with any MIC transceiver(s) that are docked in the BASE.
When the MIC is inserted into the BASE charger, the MIC shall turn on if it is not already
on. If the MIC is already in the BASE when the BASE is powered on, the MIC shall turn on.
If 5 minutes passes with no activity, the MIC shall go to stop mode.
If a record session is active when a MIC is placed in the BASE, one of the following
conditions will apply:
Record Button
Power Button
Lapel Mic Jack
Green/Yellow LED
Red LED
Help Button
Charge and Sync
Terminals on Bottom
Terminals on Bottom
Microphone