Inovonics Wireless Corporation 3B63MB4 User Manual

3 

For standard systems, install the Deluxe 5–Inch Speaker and Microphone Assembly, Part Number 78–6911–
1545–1.  Refer to the installation instructions packaged with the assembly. 

For duplex systems, install the 3.5–Inch Duplex Microphone (with foam housing), Part Number 78–6911–4476–
6 and the 5–Inch Metal Speaker Assembly, Part Number 78–6911–4411–3.  Refer to the installation instructions 
packaged with the assemblies. 

1.  For proper system operation, locate the base station module: 

•  5 to 6 feet above the floor 
•  at least 10 feet from the cashier/drive–thru window 
•  At least 3 feet from large metal objects such as refrigerators, ranges, coolers, etc., and other metal or 

electrical devices. 

Do not mount base station under steel countertops, within 3 feet of 
coolers/refrigerators/ranges or in areas where it will be obscured by steel 
doors, walls, etc. as this will cause operational problems. 

2.  Mount the base station using the included screws and anchors.  (See Figure 3.) 

 

3.  Install conduit and cable clamps as necessary. 

4.  Feed the cables for speaker, microphone, vehicle detect and monitor speaker (if used) through the conduit 

down to the interconnect module or base station.  (See Figure 1.) 

5.  Feed the transformer cable from the outlet to the base station.  (See Figure 1.) 

Keep the transformer cable at least 6 inches from the left half of the base station.  This half contains sensitive 
radio components which will be affected if the cable is too close.