Inovonics Wireless Corporation 3B63MB4 User Manual

 

4 

1.  For proper system operation, locate the programming station module 18 inches or less from the base station.  

An 18 inch cable is provided to connect between the base station and the programming station. 

Allow enough room below the programming station to allow insertion of the 
headset while it is being programmed.  Do not mount programming station too 
close above the countertop or other wall-mounted object. 

2.  Mount the programming station module using the included screws and anchors.  (See Figure 4.) 

 

 

3.  Connect the 18 inch long programming cable provided between the base station programming jack and the 

programming station jack. 

4.  If needed, connect the programming cable for use with C860 and C960 headsets and allow it to hang from 

the programming station