Inovonics Wireless Corporation 3B6OTPMTX User Manual
Registration
Confidential
13
recovery from an electrostatic discharge event. The identical type of reset
message transmitted during the registration process is transmitted by the
device during these instances, however the application controller must
process these messages differently.
message transmitted during the registration process is transmitted by the
device during these instances, however the application controller must
process these messages differently.
If the application controller is not in registration mode and a reset message
from a previously registered device is received, the application controller
should record this message in its event log as a device reset. Other status bits
that may be active in the message from the device should be processed in an
identical manner as when processed when the reset bit is not active.
from a previously registered device is received, the application controller
should record this message in its event log as a device reset. Other status bits
that may be active in the message from the device should be processed in an
identical manner as when processed when the reset bit is not active.
4.5 Removing a Registered Device from the System
To remove a registered wireless device from the system, the application
controller is placed in registration mode. The user then selects the point to be
deleted.
controller is placed in registration mode. The user then selects the point to be
deleted.
When the user selects delete for that point, the application controller will adjust
the database to remove all information, or replace the unique ID associated
with that point with a unique ID of zero and set a flag to indicate that the point
no longer has a device assigned to it. If a particular device has been
registered to more than one point and the user wants to completely remove
that device from the system, then the user must delete that device from each
point to which it is registered.
the database to remove all information, or replace the unique ID associated
with that point with a unique ID of zero and set a flag to indicate that the point
no longer has a device assigned to it. If a particular device has been
registered to more than one point and the user wants to completely remove
that device from the system, then the user must delete that device from each
point to which it is registered.