Inovonics Wireless Corporation 3B6OTPMTX Manual De Usuario

Registration

Confidential

 13

recovery from an electrostatic discharge event.  The identical type of reset 
message transmitted during the registration process is transmitted by the 
device during these instances, however the application controller must 
process these messages differently.

If the application controller is not in registration mode and a reset message 
from a previously registered device is received, the application controller 
should record this message in its event log as a device reset.  Other status bits 
that may be active in the message from the device should be processed in an 
identical manner as when processed when the reset bit is not active.

To remove a registered wireless device from the system, the application 
controller is placed in registration mode.  The user then selects the point to be 
deleted.

When the user selects delete for that point, the application controller will adjust 
the database to remove all information, or replace the unique ID associated 
with that point with a unique ID of zero and set a flag to indicate that the point 
no longer has a device assigned to it.  If a particular device has been 
registered to more than one point and the user wants to completely remove 
that device from the system, then the user must delete that device from each 
point to which it is registered.