Honeywell International Inc. 75EL0N User Manual
2 - 2
Charge the Battery
The power source for the Dolphin terminal is the 3.7V Li-ion rechargeable battery located under the battery door on the
back panel of the device. See
back panel of the device. See
on page 3-8 for additional information on battery storage, use, and disposal.
Important: Removing the battery from the terminal erases all non-persistent memory. Always place the terminal in Suspend
mode before removing the battery. For information on how to remove the battery from the terminal, see
Before Initial Use
Dolphin terminals ship with the battery significantly discharged of power. After installing the battery in the terminal, charge
the battery with a Dolphin 75e compatible charging peripheral for a minimum of 4 hours for the standard battery pack or 6
hours for the extended battery pack. When using the 70e-USB Charge/Communication cable to charge from a 500mA
USB port on a host device, charge the battery for a minimum of 6 hours for the standard battery and 8 hours for the
extended battery.
the battery with a Dolphin 75e compatible charging peripheral for a minimum of 4 hours for the standard battery pack or 6
hours for the extended battery pack. When using the 70e-USB Charge/Communication cable to charge from a 500mA
USB port on a host device, charge the battery for a minimum of 6 hours for the standard battery and 8 hours for the
extended battery.
Note: Inadequate source current may interfere with effective battery charging; see
3-10 for additional information.
Dolphin 75e model terminals are designed for use with the following charging devices and cables: 70e-HB, 70e-CB,
70e-EHB, 70e-NB, 70e-MB, 70e-MC, and 70e-USB ADAPTERKIT. See pages
70e-EHB, 70e-NB, 70e-MB, 70e-MC, and 70e-USB ADAPTERKIT. See pages
for additional information on
peripherals and accessories.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
peripherals, cables, or power adapters may cause damage not covered by the warranty.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
components may cause damage not covered by the warranty.
3
4
5
6
Apply pressure to the edges of the
battery door before engaging the lock to
ensure the door is properly closed.
battery door before engaging the lock to
ensure the door is properly closed.
!
!
Preliminary Draft, Not for Release - Please Review 2-3-2015